Filter
Top Products
34-EN
→
→
→
→
Audio Processor Operation (Optional)
Adjusting Time-Correction for 2-
Way Speaker System
Use this procedure to adjust the sound time
difference between the speakers.
1 Press and hold the FUNC (RETURN) button for
at least 2 seconds in the Divider mode.
The mode changes to the Divider Adjustment
mode.
2 Press the 3 (T-CORR.) button.
The mode changes to the Time Correction
Adjustment mode.
3 Press the rotary encoder and select the channel
you wish to adjust.
Each press changes the channels as follows:
When only one 2-way divider is connected:
→ L-Low → R-Low → F-High/L
R-High/R ← R-High/L ← F-High/R ←
When two 2-way dividers are connected:
→ L-Low → R-Low → L-High → R-High
Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment modes,
and the display also changes.
→ L-Low → R-Low → L-High → R-High
When only one 3-way divider is connected:
→ L-Low → R-Low → L-Mid → R-Mid → L-High → R-High
(IVA-C801)
(CVA-1006)
SOURCE
SOURCE
Rotary encoder Rotary encoder
FUNC
FUNC
6
6
4
4
3
3
Function buttons
(1 through 6)
Function buttons
(1 through 6)
When two 3-way dividers are connected:
→ L-Low → R-Low → L-Mid → R-Mid → L-High → R-High
Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment modes,
and the display also changes.
→ L-Low → R-Low → L-Mid → R-Mid → L-High → R-High
4 Rotate the rotary encoder clockwise or
counterclockwise to adjust the time correction
value upward or downward respectively.
5 When adjustments have been completed, press
the FUNC (RETURN) button.
The display returns to the Divider mode screen.