Filter
Top Products
39-EN
1 Activate the radio mode.
Tune in a radio station you wish to title.
2 Press and hold the INPUT button for at least 2
seconds.
The Title Inputting screen appears in the display.
3 Characters are displayed at the bottom menu.
Rotate the rotary encoder and select the desired
character for the first position.
To change between upper case, lower case,
numeral and symbol, press the 3 (A/1) button.
Each press changes the bottom menu.
4 When the character for the first position has
been selected, press the rotary encoder. The first
character has been memorized at the first
position. See "Notes" on this page.
5 Repeat steps 3 and 4 to enter the rest of
characters. You can input up to 12 characters for
titling one radio station (or CD).
6 When titling has been completed, press the 6
(WRITE) button to store the title in memory.
The display changes to the Radio mode.
To title other stations (or CDs), repeat this
procedure. You can title up to 120 (max.) stations
and CDs combined. The input titles will be
displayed when a station (or CD) titled is
selected.
NOTES
• If the memory capacity for radio station titles is full and if
you attempt to title a new station, the oldest title will be
erased to make room for the new one. To delete a title,
select the title you want to delete, then select "SPC"
(space) and press the 6 (WRITE) button.
• When the 1 (; BACK) or 2 (NEXT -) button is
pressed, the cursor moves to the left or right on the input
titles.
• If an incorrect character has been entered, select "SPC"
(space) and input a new character or press the 4
(DELETE) button to delete the previous character. Press
the 5 (CLEAR) button while inputting the titles to erase
all the characters you have input.
• Pressing the FUNC (RETURN) button in the Title Input
mode changes the display back to the previous display.
• You can title the VIDEO CD/CD while it is in DVD or DVD
changer mode. The title you entered is displayed in the
Disc Title List display (P. 23).
(Do not operate while driving. Stop the car, then use this
operation.)
• When DVA-5200 and DVA-5205 are connected:
To display the title input screen, switch to the DVD main
screen mode and press and hold the INPUT button for at
least 2 seconds while playing the video CD or CD.
To display the list of disc titles, switch to the DVD main
screen mode and press the LIST button while playing the
video CD or CD.
• Immediately after inputting titles or changing the settings
of Setup Mode or Display Mode (While the system is
inputting the titles or data automatically) do not turn the
ignition key (engine key) to OFF.
Otherwise, the title may not be written, or the settings may
not be changed.