Filter
Top Products
18-EN
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.
1
Turn off the unit power.
2
Press (Release) to remove the front panel.
3
Press RESET with a ballpoint pen or similar pointed
object.
Inserting/Ejecting a Disc
1
Insert the disc with the label side facing up.
When you insert the disc up to certain point, it is
automatically pulled into the unit. The unit starts to play the
disc.
• Do not touch the surface of the disc directly with your fingers.
• Before inserting or removing the disc, always turn the ignition key to
ACC or ON. You cannot remove or insert the disc with the ignition
key turned to OFF.
1
Press (Eject).
When the disc has been ejected part way, take it out.
• If the disc cannot be ejected by pressing , press and hold again
for at least 5 seconds.
Adjusting the Volume
Rotate the Rotary encoder until the desired sound is
obtained.
Volume: 0 - 35
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
1
Press Rotary encoder to activate the MUTE mode.
The audio level will decrease by about 20 dB.
2
Pressing Rotary encoder again will bring the audio
back to its previous level.
Using My Favorites
Display example of My Favorites screen
User name: Displays the name of the user
My Favorites icon: Touching an icon on My Favorites
screen will switch to the screen for the selected
application.
Add button: Use to add (register) My Favorites icons
(page 20)
Edit button: Use to edit My Favorites (page 20)
Camera button: Use to display the camera image
(page 21)
i-Personalize button: Use to configure the i-Personalize
Setup (page 21)
Inserting the Disc
Removing the Disc
RESET switch
Disc Slot