Filter
Top Products
–57–
Troubleshooting
Symptom Remedy
POWER button on Monitor does not function. No function or display. • Turn ignition ‘ON’.
• Check vehicle's battery voltage.
• Consult a BMW Center.
No picture on Monitor screen during playback. • Confirm Monitor's power button is ‘ON’
• Confirm Monitor's input is set to appropriate source.
• Adjust monitor brightness.
• Monitor's protective circuit is on because of high temperature.
Wait until temperature inside vehicle comes down to normal
monitor operating temperature.
• Open connection with Monitor, AV Interface unit, or DVD. Consult a
BMW Center.
Picture color is poor. • Set Brightness/Color/Tint controls to proper settings.
Spots or dotted lines/stripes appear. • Caused by neon signs, high-voltage power lines, CB transmitter, and
other vehicle's ignition plugs, cell phones, etc. Change location of the
vehicle.
No Remote Control operation or unstable operation. • Remove any obstacle between System Remote Control and remote.
Sensor on Monitor.
• Replace batteries with new ones. Insert them correctly.
• Ensure System Remote Control is being aimed at correct angle at
remote sensor on Monitor. (See page 49)
• Clean remote sensor or transmitter.
No sound from headphones. • Turn on POWER to headphone.
• Turn up volume on headphones.
• Replace batteries in headphones.
Monitor/Sound
CN1013887ID