Filter
Top Products
–6–
Quick Reference Guide
Following these steps will allow quick access to the
functions of BMW’s DVD Rear Seat Entertainment
System.
Please refer to complete Owner’s Manual for additional
and more detailed information.
1. Turn vehicle ignition key to Position 1 (Steering
Unlocked), Position 2 (Ignition ON), or Position 3
(Engine Start).
Note: System will not function in vehicle
ignition key Position 0 (Steering Lock).
2. Press POWER buttons on Monitors. (Red LEDs
located adjacent to the power buttons will illuminate.)
Monitors may also be switched ‘ON’ using the
Monitor POWER button on System Remote Control.
(Refer to page 43, Figure 1, ‘Monitor POWER’)
3. Press Audio/Video SOURCE button on Monitors until
‘AV 1’ mode is selected, (Refer to page 9, Figure 2,
‘Audio/Video SOURCE’) The ‘SEL’ button on
System Remote Control may also be used to change
sources. (Refer to page 43, Figure 2, ‘SEL’)
4. Press POWER button on DVD Player. (Control but-
ton backlighting will be illuminated.) DVD Player may
also be switched ‘ON’ using the DVD POWER button
on System Remote Control. (Refer to page 45,
Figure 11, ‘DVD POWER’)
5. Insert DVD into DVD Player in center console if a
disc is not currently loaded. (Refer to page 21,
Figure 10, ‘Loading Discs’)
6. Press PLAY button on System Remote Control to
start DVD play. (Refer to page 45, Figure 14,
‘PLAY/PAUSE’)
7. Press POWER buttons on headphones. Set head-
phone channel A/B as appropriate. (Refer to page 51
‘Headphones Control Layout and Operation’)
CN1013887ID