Filter
Top Products
Figure 6.2: D6645 Line Terminator Card
Callout ᅳ Description
1 ᅳ 48-pin connection to D6640/D6641 Line Card.
2 ᅳ Alignment Guide - Stabilizes the connection and acts as a guide for connecting the
terminator card to the line card.
3 ᅳ Telco Line Jacks - Standard telephone lines connect to the RJ11C jacks.
D6640/D6641 LED Descriptions
Each LED represents a line. For example, LED 1 is for line 1. The LED is active until the system
acknowledges the entire transmission and the telephone line is ready to receive signals. The
following table describes LED patterns and colors, and their indications.
Flash Pattern (Color) Function
Flashes (green) An incoming call is ringing.
ON Steady (green)
The receiver is online.
ON Steady (red or yellow)
The line card detects a line fault condition.
OFF
The line card is ready to receive signals, or is
disabled.
Table 6.1: LED Descriptions
Card Installation
!
Warning!
Discharge static electricity from your body by touching the receiver’s internal frame (unpain-
ted section) before handling any circuit card.
6.1.1
6.2
20 en | D6600 Specific Cards
Conettix Communications Receiver/
Gateway
2012.11 | 08 | 4998122704 Installation and Operation Guide Bosch Security Systems, Inc.