Filter
Top Products
12 255.255.240.0 28 240.0.0.0
13 255.255.224.0 29 224.0.0.0
14 255.255.192.0 30 192.0.0.0
15 255.255.128.0 31 128.0.0.0
16 255.255.0.0
The following prompt appears:
4
Press Enter to accept the password setting at none.
i
Notice!
In most cases, do not assign a password. If a password is necessary, store it in a safe place. If
you lose or forget the password, you cannot connect to D6100i using telnet until you send the
unit to the factory for password removal, and the unit is returned to you.
The Setup Mode information appears.
1. Type 1 and press Enter to set up Channel 1 configuration. This information appears.
68 en | Network Communications
Conettix Communications Receiver/
Gateway
2012.11 | 08 | 4998122704 Installation and Operation Guide Bosch Security Systems, Inc.