Filter
Top Products
Power
Power Supply Modules
Main Power
D6600 Power Input
AC Nominal Operating Range 120 V or 230 V
AC maximum Operating Range 100 VAC to 120 VAC, 220 VAC to 240 VAC, 50–60 Hz
2.5 A maximum
Power Cord IEC 60320 C13 type
Replaceable Fuse 2.5A F250V Fast blow 5x20mm
D6100IPv6 Power Input
AC Nominal Operating Range
18VAC (Refer to the specific Installation Supplement
supplied with your product for your application for
supplied transformer specifics)
Standby Power
i
Notice!
Refer to the appropriate Installation Supplement included with your product for the specifics
of your particular installation.
During a loss of AC power, the receiver automatically switches to standby power. External
batteries or an uninterruptible power supply (UPS) provides standby power. As long as there
is adequate standby power, the receiver’s operation is not interrupted, even if the power loss
occurs during signal processing. When power supervision is enabled and a loss of AC power
occurs, the primary reporting devices (such as printers and computers) show AC FAIL and the
D6600/D6100IPv6 power indicator starts blinking. When AC power restores, the power
indicator stops blinking and reporting devices show AC RESTORE.
Connecting External Batteries
i
Notice!
Do not connect an external battery charger to the D6600/D610IPv6 or its battery. There is a
risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries ac-
cording to the instructions.
Use the terminal on the rear panel to connect an external DC power source. During AC power
outages, the external DC source supplies power to the receiver. Use a 12 VDC, 7 to 18 Ah
lead-acid battery for external backup power.
Battery Voltage Display during AC power
outage
Display if no battery when
AC power is restored
Above 11.5 V Battery OK
9
9.1
9.2
9.3
9.4
Conettix Communications Receiver/
Gateway
Power | en 27
Bosch Security Systems, Inc. Installation and Operation Guide 2012.11 | 08 | 4998122704