Filter
Top Products
14. Press Enter to view 6.4.1 IP Address 1.
15. Press Enter again to enter the IP address of the host PC that runs the D6200 Software
i
Notice!
When entering an IP address through the keypad of the D6100i, press an alpha character ([A]
to [F]) to enter a decimal point in the IP address. For example, enter IP address
202.96.168.127 as:
[2][0][2][A][9][6][A][1][6][8][A][1][2][7][ENTER].
16. Press the Down button to view 6.4.5 Network Programming Enable. Verify that the value
is 1. If the value is not 1, press Enter [1] Enter.
17. Press Cancel repeatedly to return to the idle stage (time and date show on the LCD).
Conettix Communications Receiver/
Gateway
Network Communications | en 71
Bosch Security Systems, Inc. Installation and Operation Guide 2012.11 | 08 | 4998122704