Filter
Top Products
VRX610 3130 VRX610
Other Functions
Clock Adjustment
1. Press the ADJ button * to display the ad-
justment selection display.
2. Move the JOYSTICK ¡ up or down to select
CLOCK, then press ENT at the center of the
JOYSTICK ¡ to display the clock adjustment
display.
3. Move the JOYSTICK ¡ left or right to select
HR or MIN, then move the JOYSTICK ¡ up
or down to adjust the time.
∗ The time is displayed in 12-hour format.
4. Pressing ENT at the center of the JOYSTICK
¡ when the cursor is above HR or MIN saves
the adjusted value in memory and simulta-
neously returns the display to the previous
display (adjustment selection display).
To cancel clock adjustment before completion,
use the JOYSTICK ¡ to move the cursor to
MENU, then press ENT at the center of the
JOYSTICK ¡.
Triggered audio mute for cellular
telepones
This unit requires special wiring to mute the au-
dio signal automatically when a cellular telephone
rings in the car.
∗ This function is not compatible wiht all cellular
telepones Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.
Other Functions
Always turning on the button
illumination on the operation panel
Note:
• The following operation is enabled when the panel
is open.
The button illumination on the operation panel
when the display is turned upward, can be
switched between “ON” and “OFF”.
● “ON”: Button illumination on the operation
panel turns on for 5 seconds;
● “OFF” : Button illumination is always on when
the power is turned on;
1.
When the panel is open, press the ADJ button
£ to show the adjustment selection display.
2. Operate the JOYSTICK ¡ upward or down-
ward and select “AUTO ILL” to show “ON”
and “OFF” in the menu bar.
3. Operate the JOYSTICK ¡ rightward or left-
ward to select either position to be set and
press the ENT at the center of the JOYSTICK
¡ for setting.
4. Press the ADJ button * to return to the pre-
vious mode.
∗
To set “ON” again, switch “OFF” to “ON” manually.
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed. The numbers of titles that
can be entered for each mode are as follows.
∗ You cannot enter titles with the unit in Seek, Pre-
set Scan, Auto store (TUNER, TV), Scan, Repeat
or Random (CD changer, MD changer) mode. Can-
cel each of those operations before entering titles.
1. Press the FUNC button 1 to select the mode
you want to enter a title (CD changer or TV).
2. Select and play a CD in the CD changer or
tune in to a TV station for which you want to
enter the title.
3. If you press and hold the TITLE button ( for
1 second or longer, the display switches to
the title input mode display.
4. Operate the JOYSTICK ¡ upward or down-
ward, rightward or leftward and move the cur-
sor to the character to be entered. Press the
ENT at the center of the JOYSTICK ¡.
∗ When the cursor is at the lower/upper limit of
the display, operate the JOYSTICK ¡ upward
or downward, the character string of the follow-
ing line appears.
“-->” : Space
“<--” : Backspace
“--I--” : Centering
5. Repeat the step 4 to enter the complete title.
6.
Press and hold the ENT at the center of the
JOYSTICK ¡ for 2 seconds or longer to store
the title into memory and cancel title input mode.
Title list play
You can display a list of titles, then select the disc
or broadcast station to listen to from that list.
∗ You can not display a title list with the unit in Seek,
Preset Scan, Auto store (Tuner or TV), Scan, Re-
peat or Random (CD changer or MD changer)
mode. Cancel those operation modes before to
display a title list.
1. With the unit in radio, CD/MD changer, TV,
press the TITLE button (. A title list is dis-
played. The following functions can be car-
ried out in a title list display.
● TUNER: A title of a channel stored in the
presets 1 to 6 or a channel number is dis-
played.
● CD/MD changer: DISC titles for discs 1 to
6 are displayed (By changing over a display
page in case of 12-CD changer, disc 7 to 12
can be displayed). When there is not any disc
in a changer, ”---------” is displayed.
● TV: A title of a channel stored in the pre-
sets 1 to 6 or a channel number is displayed.
2. Operate the JOYSTICK ¡ upward or down-
ward to select one of the items 1 to 6. Press
ENT at the center of the JOYSTICK ¡ to re-
produce the selected broadcast station or
disc.
∗ In case of 12-CD changer, move the cursor to
disc 6 and then operate the JOYSTICK ¡
downward to change over to a list display of
discs 7 to 12.
3. Press the TITLE button ( again to return to
the STANDARD display.
Mode Number of titles
Radio mode 30 titles
TV mode 15 titles
CD changer mode Number of titles
CDC655z connected 60 titles
CDC655Tz connected 100 titles
CDC1255z connected 50 titles