Filter
Top Products
43
ISP - Rev 6/95
- If the previous step does not yield satisfactory results, if unacceptable
overshooting has been noted, substitute a larger value than 0.022æF; or, if
the response is overdamped substitute a smaller value than 0.022æF.
Repetition of this procedure should yield an optimum choice for C1.
Reference input signal
Overdamped: T4 too far CW
Critically damped: T4 optimum
Underdamped: T4 too far CCW
Fig. 8.1
Typical velocity response waveforms