Filter
Top Products
Technical Specification
Input Specification
Duplex mode
Data Rate 1.5 – 208 Mbps
TS CBR MPTS/SPTS feeds
Error correction Pro MPEG FEC
B.4.7 Frame Sync Connector
The Decoder can frame lock to an external video source. The frame information is
input as a composite synchronous signal, with or without active video. The user can
offset the sync to the video output by ±32,000 HD pixels, with a resolution of one
pixel.
It is possible to connect multiple Receivers to the same reference signal. This input
requires an external 75 Ω termination.
Table B.18 Frame Sync Connector
Item Specification
Safety status SELV
Connector type BNC, Female
Connector
designation
Frame Sync
Pin: Centre Analogue Black and Burst Input
Shield Ground/Chassis
B.5 Output Specifications
B.5.1 Video Outputs
B.5.1.1 Analogue HD Video
Table B.19 Analogue Video Output Connectors
Item Specification
Safety status SELV
Connector type 15-way D-type
Connector designation Video Out
Video standards 1080 interlaced
Video level (luminance)
700 mV ± 30 mV
EN/LZT 790 0003/2 R1A
B-17