Filter
Top Products
Menus
After making a selection (in EDIT mode using page 1), and selecting the required
component data streams (using the other pages), pressing SAVE makes it the
current service. The audio and data modules will decode according to the default
parameters set in other pages.
Table C.13 Service Menu
Display Title:
Service
Description Section
Video
The Video signal status submenu contains
information about the currently decoded MPEG-2
video.
C.7.2
Audio 1
The Audio 1 signal status submenu contains
information about the audio format and quality of
the currently decoded audio stream on the primary
audio output.
C.7.3
Audio 2
The Audio 2 signal status submenu contains
information about the audio format and quality of
the currently decoded audio stream on the
secondary audio output.
C.7.4
Audio 3
The Audio 3 signal status submenu contains
information about the audio format and quality of
the currently decoded audio stream on the
secondary audio output.
C.7.5
Audio 4
The Audio 4 signal status submenu contains
information about the audio format and quality of
the currently decoded audio stream on the
secondary audio output.
C.7.6
Async Data
The Async Data submenu allow status monitoring
and configuration of the low and high speed data.
C.7.7
Ethernet Data
The Ethernet Data sub menu allows status
monitoring and configuration of the High Speed
Data over Ethernet.
C.7.8
VBI
The VBI status submenu displays the current status
of the VBI components.
C.7.9
PCR PID
The PCR PID submenu displays the Program Clock
Reference packet identifier and its status.
C.7.10
Network ID
The Network ID submenu displays the network ID
and the Original Network ID from the current
Service Description Tables.
C.7.11
C.7.2 Video Menu
The Video signal status submenu contains information about the currently decoded
MPEG-2 video.
EN/LZT 790 0003/2 R1A
C-14