Filter
Top Products
Factory Defaults
E Factory Defaults
Annex E
Units are shipped with the following factory default parameters. These can be restored at any time
using the System Menu. All other parameters are unaffected by restoring the factory defaults.
Menu Description Default
#2 Input SELECT INPUT ASI
SOURCE 1
LNB FREQUENCY 10750.0 MHz
SATELLITE FREQUENCY 12168.0 MHz
SYMBOL RATE 27.5 Msym/s
MODULATION FEC QPSK auto
LNB POWER OFF
LNB 22 kHz Disabled
SEARCH RANGE 3000 kHz (5000 kHz)
#2 Input QPSK/8PSK/16QAM
REED-SOLOMON DISABLED
INTERLEAVER DISABLED TTV G.703
SIGNAL LEVEL NORMAL
IP Address 192.168.02.101 for port 1
192.168.02.102 for port 2
Subnet Mask 255.255.255.0
Default Gateway 0.0.0.0
MAC 00:20:AA:4F:XX:XX for port 1
00:20:AA:50:XX:XX for port 2
Where XX:XX is serial number
Line mode Auto
VLAN Off
Dual IP NIC Input
ICMP (ping) On
EN/LZT 790 0003/2 R1A
E-1