Operating the Equipment Locally
EN/LZT 790 0003/2 R1A
3-28
Step Action Result
6
Scroll to Menu 7.1.3.1 and edit the
Subnet Mask. Press Save.
Edits the Subnet Mask.
7
Scroll to Menu 7.1.3.2 and edit the
Gateway address. Press Save.
Edits the Gateway address.
8
Scroll to Menu 7.1.4 and
activate/deactivate the Restore system
defaults. Press Save.
Edits the Restore System Defaults menu.
9
Scroll to Menu 7.1.5 and edit the
Service Hunt Mode (ENABLED or
DISABLED). Press Save.
Edits the Service Hunt Mode menu.
10
Scroll to Menu 7.1.6 and edit the Input
Stream SI Type (AUTO, ATSC or
DVB). Press Save.
Edits the Input Stream SI Type.
11
Scroll to Menu 7.1.7 and edit the
Customization Key. Press Save.
Edits the Customization Key menu.
Table 3.42 Viewing the Multi-Format Receiver Details Menu
Step Action Result
1 Go to Menu 7.2.
Accesses the Multi-Format Receiver Details
Menu and displays the Electronic Serial Number.
2 Scroll to Menu 7.2.1. Displays the Software Version.
2 Scroll to Menu 7.2.2. Displays the Firmware Version.
3 Scroll to Menu 7.2.3. Displays the Hardware Version.
4 Scroll to Menu 7.2.4. Displays the PLD Version.
5 Scroll to Menu 7.2.5. Displays the Temperature.
3.12 Restarting the Unit
The System Restart submenu allows the user to reboot the unit without having to
remove and insert the power cable.
Table 3.43 System Restart Menu
Step Action Result
1 Go to Menu 7.3. Accesses the System Restart menu.
2 Press Edit. ACTIVATE will be displayed.
3 Press Save to activate. Unit is restarted.