Ericsson RX1290 Car Satellite TV System User Manual


 
Operating the Equipment Locally
3.4.2 Selecting a Menu Option
Some items shown in the right display area of the front panel LCD display have a
set number of options. An example of this is the VIDEO TEST PATTERN (Menu
3.1.6) which has a number of preset Video Test Patterns associated with it. Use the
following steps as a general guide to selecting an option.
Table 3.3 Selecting a Menu Option
Step Action Result
1
Select the menu and display the
required selection.
Normally there is only one selectable item. If
there is more than one, use the Right and Left
pushbuttons as described in Table 3.4.
2 Press Edit on the front panel.
The Save button will come on to show that the
new option can be stored.
3
Use the arrow pushbuttons to
step through the options.
This action scrolls through the options in a
continuous loop.
4
Press Save to store the option
or press Edit to cancel the
selection and return to the
source menu.
3.4.3 Entering a Menu Value
Some items shown in the right display area of the front panel LCD display have a
user-entered value. An example of this is the IP Address (Menu 7.1.3) in which the
unit’s Network address has to be entered. Use the following steps as a general
guide to entering a value.
Table 3.4 Entering a Menu Value
Step Action Result
1
Select the menu and display the
required selection.
2 Press Edit on the front panel.
The Save button will come on to show that the
new value can be stored.
3
Use the Right or Left
pushbutton to move the cursor
to the required digit.
Each pushbutton has a built-in LED that turns
on if the pushbutton function is appropriate to
the displayed information.
4
Change the value by using the
arrow pushbuttons.
5 Press Save to store the option.
EN/LZT 790 0003/2 R1A
3-8