Filter
Top Products
28
General operations
Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit.
Press the RESET button on the front panel to restore the unit to the original factory settings.
Power on/off
Press POWER/MUTE button on the front panel or the POWER button on the RC to turn the unit on. Press and
hold the POWER/MUTE button for 2 seconds or press the POWER button on the RC to turn the unit power off.
Note: After the unit is off, the volume level and radio current settings will be memorized, and when you turn the
unit on it will resume the stored status that you set.
Volume control
Press the VOL + on the RC or on the panel to increase the volume level.
Press the VOL - on the RC or on the panel to decrease the volume level.
Mute function
When the unit power is on press the POWER/MUTE button on the panel or the MUTE button on the RC to mute
volume control. Press it again or press the VOL +/- button to resume the volume.
Mode selecting
Short press the MENU/SRC button on front panel to get playback source menu, and press the direction button on
the remote control or of the joystick to select a playback source (or touch the touch key): TUNER => DVD => SD
CARD => AUX IN => RGB IN => CAMERA.