Filter
Top Products
29
Then press PLAY/PAUSE button or press the joystick uprightly to enter the selected source.
OR press the corresponding button on the monitor: TUNER, SD, DVD.
OR press the SRC button on the RC repeatedly to select the source: for the 1
st
zone on the main RC, for the 2
nd
zone on the RC 2.
Setting the audio system
Audio control allows you to easily adjust the audio system to meet the in-car acoustic characteristics that vary
depending on the type of car and its measurement to get the best possible sound spaciousness, be sure to make
setting for the speakers as well, making setting for "FADER" and "BALANCE" boots the effect of the cabin
equalizer.
1. Short pressing SEL button on the front panel, "Audio" menu is displayed.
2. Pressing 9/: button on remote control, or press / of the joystick to select the audio item for
adjustment: EQ => BASS => TREBLE => FADER => BALANCE => SUBWOOFER => LOUD.
3. Press the volume button or press 8/ on the remote control, or press of joystick.
4. Exit Audio Control Mode Long press SEL button on the front panel or stop the operation for a few seconds.
Note: Select EQ according to this sequence: User => Flat => Jazz => Pop => Classic => Rock => Vocal.
Different EQ reflects in different Bass level and Treble level and the Bass and Treble level could be adjusted only
in User (user setting) mode.
The LOUD function compensates deficiencies in the low and high sound ranges at low volume. You can select a
desired Loudness level.