Filter
Top Products
62
Subwoofer: set up the subwoofer: Large (subwoofer is employed), None (subwoofer is not employed).
Center: set up the center speaker: Large (suitable for speaker with good bass output), Small (for speaker with
bad bass output), None (center speaker is not employed).
Surround FX
Pro Logic II is a dramatically improved matrix surround system based on the original Dolby Pro Logic system. In
the case of Pro Logic, there were four channels: front left, center and front right, plus a mono surround channel
that was usually split between two rear speakers. Compared to DPL, DPL II offers two full-range stereo surround
channels, more sophisticated steering logic, high channel separation and an exceptionally stable sound field. DPL
II uses a simple servo circuits used to derive the five channels. And, unlike the synthetic Jazz club, Hall and
Stadium modes found on many AV receivers, DPL II introduces no phony delay-induced echoes, reverb, or tonal
coloration.
1. Enter the Surround FX menu.
2. Use the buttons on the panel or 8/ buttons on the RC or touch
the desired item on the screen to select the settings: Surround mode,
Panorama, Dimension ctrl, Center width ctrl.
3. Press the buttons on the panel or 9/: buttons on the RC or touch
the desired button on the screen to enter the list of values.
4. Press the buttons on the panel or 8/ buttons on the RC or touch
the desired button on the screen to select the desired value.
5. Press PLAY/PAUSE button to confirm.
Surround mode: select the surround sound effect: Off (playback as the original audio output), Surround I (using
the DPL as the decoding method), Surr matrix (from mono output to surround effect), Surr movie (enhance
movie surround effects), Surr music (surround music effects).