Filter
Top Products
# Only when the tuner has been tuned in to an
HD Radio broadcasting, display can be changed.
# When the tuner has been tuned in to an HD
Radio broadcasting, default display is changed
into station name instead of frequency.
Introduction of advanced tuner
operation
1 Touch AV Menu and then touch
Function Menu to display the function
names.
The function names are displayed and oper-
able ones are highlighted.
2 Touch ESC to return to the frequency
display.
# To return to theprevious display, touch Back.
Storing the strongest broadcast
frequencies
The operation is the same as that of the tuner.
(Refer to Storing the strongest broadcast fre-
quencies on page 18.)
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1 Touch Local on the function menu.
2 Touch d on Local to turn on.
# To turn off, touch c.
3 Touch c or d on Level to select the de-
sired level.
1—2—3—4
Larger setting number is higher level. The
highest level setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
Switching the seek mode
There are two method of seek tuning settings,
one is HD (Digital broadcasting stations seek)
and the other is All (normal seek).
% Touch Seek on the function menu to se-
lect your favorite setting.
All—HD
Switching the reception mode
If a digital broadcast reception condition gets
poor, this unit automatically switches to the
analog broadcast of the same frequency level.
If this function is set to D/A Auto, the tuner
switches between digital broadcast and ana-
log broadcast automatically. If this function is
Analog, reception will be conducted within an
analog broadcast.
% Touch Blending on the function menu
to select your favorite setting.
D/A Auto—Analog
Note
If Seek is set to HD and Blending is set to
Analog, the tuner can not receive broadcasts. In
this case, the seek mode or reception mode is
changed automatically as follows:
! When Seek is set to HD, if you switch
Blending from D/A Auto to Analog, Seek is
changed to All.
! When Blending is set to Analog, if you switch
Seek from All to HD, Blending is changed to
D/A Auto.
Available accessories
En
71
Section
19
Available accessories