Filter
Top Products
5 To perform seek tuning, keep touching
c or d for about one second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found.
# You can cancel seek tuning by briefly touching
either c or d.
# If you keep touching c or d you can skip
broadcasting channels. Seek tuning starts as
soon as you release the keys.
# You can also perform seek tuning by pressing
and holding c or d (TRK).
Storing and recalling broadcast
stations
You can easily store up to 12 broadcast sta-
tions for later recall.
! Six stations for each band can be stored in
memory.
1 Touch List to display the preset list.
2 When you find a station that you want
to store in memory, keep touching one of
preset tuning keys P01 to P12 until the
beep sounds.
The selected broadcast station has been
stored in memory.
The next time you touch the same preset tun-
ing key the station is recalled from memory.
# When P01 to P06 and P07 to P12 are not dis-
played, you can display them by touching List.
# To switch between P01 to P06 and P07 to P12,
touch a or b.
Storing the strongest broadcast
stations sequentially
1 Touch AV Menu and then touch
Function Menu to display the function
names.
2 Touch BSSM on the function menu to
turn BSSM on.
BSSM begins to flash. While BSSM is flashing
the 12 strongest broadcast stations will be
stored in order from the lowest channel up.
When finished, BSSM stops flashing.
# To cancel the storage process, touch BSSM
again.
3 Touch ESC to return to the frequency
display.
# To return to theprevious display, touch Back.
Note
Storing broadcast stations with BSSM may re-
place broadcast stations you have saved using
P01 to P12.
Available accessories
En
82
Section
19