Filter
Top Products
En
66
13
Section
Other Functions
Introduction of advanced XM
tuner operation
1 FUNCTION display
Shows the function status.
1 Press A.MENU when XM source indications
are displayed.
MENU is displayed.
2 Select XM and press A.MENU.
TUNER MENU indications are displayed as
follows:
CH MODE (channel mode)
P.CH RECALL (preset channel recall)
P.CH MEMORY (preset channel memory)
• Select BACK in the MENU display or press
BACK to return to the previous display.
Pressing WIDE on the main unit returns you to
the previous display.
• To return to the frequency display, press both
BAND/ESC and DISP.
Note
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the frequency display.
Switching the channel select mode
You can switch if you select a Channel with a
Channel Number or from a Channel Category
when you select a channel.
1 Press 5 or ∞ to select CH MODE from the
XM MENU, and press A.MENU.
CH MODE adjustment indications are
displayed.
2 Press 2 or 3 to select the desired channel
select mode.
CH NAME (Channel name select mode) —
CATEGORY (Channel category select mode)
Display the ID Code
Each XM tuner is identified with a unique radio
ID. You will need the radio ID when activating
XM service or when reporting a problem. How to
display the ID code depends on the channel
select mode.
Channel number select mode
If you select CH 000, the ID code is displayed.
• Select the CH 000 with the 2/3
Channel category select mode
RADIO ID is provided as a channel category for
displaying the ID code.
• Select the Channel Category RADIO ID with
the 5/∞ buttons.
• If you select another channel, display of the ID
code is canceled.
• Display of the ID code repeats displaying
RADIO ID and the ID code one after the other.
1