Filter
Top Products
! After you set up the rear view camera set-
ting, move the shift lever to REVERSE (R)
and confirm that the rear view camera
video is shown on the display.
! Change this setting if the display switches
to the rear view camera video by error while
you are driving forward.
! To stop watching the rear view camera
video and return to the source display,
press and hold MUTE.
! Touch the RearView source icon to display
the rear view camera image while driving.
Touch the source icon again to turn the
rear view camera off. For details, refer to Se-
lecting a source using the touch panel keys
on page 15.
1 Display the system menu.
Refer to Introduction of menu operations on
page 56.
2 Touch Camera Polarity on the system
menu to select the appropriate setting.
! Battery – When the polarity of the con-
nected lead is positive while the shift lever
is in REVERSE (R) position
! Ground – When the polarity of the con-
nected lead is negative while the shift lever
is in REVERSE (R) position
! Off – When a rear viewcamera is not con-
nected to this unit
Note
You can also switch the rear view image by press-
ing the touch key, regardlessof the
Camera Polarity setting on the system menu.
Refer to Basic operations on page 14.
Setting the video signal
When you connect this unit to an AV equip-
ment to this unit, select the suitable video sig-
nal setting.
! As this function is initially set to Auto, the
unit will automatically adjust the video sig-
nal setting.
! You can operate this function only for the
video signal input into the AV input.
1 Display the system menu.
Refer to Introduction of menu operations on
page 56.
2 Touch Video Signal Setting on the func-
tion menu.
Video Signal Setting items are displayed.
! AV – Adjusts the AV video signal
! AUX – Adjusts the AUX video signal
! Camera – Adjusts the rear viewcamera
video signal
3 Touch c or d to select the desired
video signal appears.
Auto—PAL—NTSC—PAL-M—PAL-N—
SECAM
Setting the Artwork Dance
When a song is played by MIXTRAX, the art-
work display can be moved based on the
music type.
1 Display the system menu.
Refer to Introduction of menu operations on
page 56.
2 Touch Artwork Dance setting on the
system menu to turn On or Off.
Changing the picture adjustment
You can adjust the Brightness (brightness),
Contrast (contrast), Color (color) , Hue (hue),
Dimmer (dimmer), and Temperature (tem-
perature) for each source and rear view cam-
era.
! You cannot adjust Color, Hue and
Contrast for the audio source.
1 Display the system menu.
Refer to Introduction of menu operations on
page 56.
En
67
Section
15
Menu operations
Menu operations