Open as PDF
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS
Initial Setting Menu Functions
The Initial Setting Menu features the following functions.
Setting the Time
This is the mode for setting the time on the unit’s clock display. (Refer to page 47 for
details concerning the clock display.)
As soon as you switch to “Minute”, the seconds start counting from 00.
Setting the Warning Tone (WARN)
You can switch the Warning Tone function ON/OFF. (Refer to “Warning Tone” on page
1. Press the FUNCTION button and select the Warning Tone mode (WARN) in
the Initial Setting Menu.
2. Switch the Warning Tone
ON/OFF with the 5/∞ but-
3. Set as desired with the 5/∞
2. Select “Hour” or “Minute”
with the 2/3 buttons.
1. Press the FUNCTION button and select the Time setting mode in the Initial