Filter
Top Products
30
HT-DV40H
HT-DV50H
Basic Operation
General control
To turn the power on
Press the ON/STAND-BY button to turn the power on.
Illumination light control
Press the MEMORY/DIMMER button for more than 2 seconds to
adjust the brightness of the display and volume ring.
Auto power off function
In the stop mode of discs/USB operation, the main unit enters the
stand-by mode after 15 minutes of inactivity.
Volume auto fade-in
If you turn off and on the main unit with volume set to 34 or
higher, the volume starts at 20 and fades in to the last set level.
If you turn off and on the main unit with the volume level set to less
than 34, the volume starts at the last level volume setting.
Volume control
Main unit operation:
When the VOLUME control is turned clockwise, the volume will
increase. When it is turned anti-clockwise, the volume will decrease.
Remote control operation:
Press the VOLUME (+ or –) button to increase or decrease the volume.
Subwoofer level control
The subwoofer level can be adjusted.
Notes:
When sound from the subwoofer is distorted, decrease the
subwoofer level.
When changing the subwoofer level, the output level of the
SUBWOOFER PRE OUT is also changed.
Function
When the FUNCTION button on main unit is pressed, the current
function will change to different mode. Press the FUNCTION button
repeatedly to select desired function.
Note:
The backup function will protect the memorised function mode for a
few hours should there be a power failure or the AC power lead
becomes disconnected.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
1 2 3
4 5 6
7 8 9
+100
Volume
ring
Volume ring light and display bright
Volume ring light off and display dim
Volume ring light off and display gets dimmer
To increase the level, hold down the
SHIFT button and press the
SUBWOOFER LEVEL + button.
To decrease the level, hold down the
SHIFT button and press the
SUBWOOFER LEVEL
-
button.
39 MAX0 1
...
+5-5 -4
...
+4
DVD/CD USB TUNER OPTICAL 1
OPTICAL 2AUX INSCART