Sharp HT-DV50H Car Speaker User Manual


 
47
HT-DV40H
HT-DV50H
CD, CD-R and CD-RW Operation
Advanced CD or MP3/WMA disc playback
To play in random order (random play)
The tracks on the disc play back can be played in random order
automatically.
To cancel random play:
To cancel random playback, press the SHIFT and RANDOM
buttons, so that the random “R**” character will disappear.
Notes:
On some disc, this function cannot be used.
If RANDOM button is pressed whilst in programmed playback,
playback will enter random mode and programme is cancelled.
In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
If you press the or button during random play, you
can move to the track selected next by the random operation.
In random function, playback will continue until button is
pressed.
To start playback from the desired point
(direct play)
By using the Direct Search buttons, the desired tracks on the current
disc can be played.
Notes:
A track number higher than the number of tracks on the disc
cannot be selected.
During random play, direct search is not possible.
For CD-R/RW discs recorded in the MP3 or WMA format, you can
select the track number but cannot select the folder by pressing
the Direct Search buttons.
Notes:
This unit only supports “MPEG-1 Audio Layer-3” and “MPEG-2
Audio Layer-3” format. (Sampling Frequency is 32, 44.1, 48kHz)
“MPEG-2.5 Audio Layer-3” and MP1, MP2 format are not
supported.
Playback order for MP3 files may differ sometimes depending on
the writing software used during file downloading.
Bitrate which is supported by MP3 is 32~320 kbps, WMA is
64~160 kbps.
For MP3/WMA files, please put “.MP3” “.WMA” extension. Files
cannot be played back if there is no MP3/WMA extension.
Playlists are not supported on this unit.
This unit only supports MP3 ID3-Tag version 1.x.
The display playback time may not be displayed correctly when
playing back a variable bitrate file.
Copyright protected WMA files cannot be played back.
In the stop or playback mode, press the SHIFT button and then
the RANDOM button.
All the tracks play in random order.
WMA
[ON]Random
Unit DisplayTV screen
Use the Direct Search buttons
on the remote control to select
the desired track whilst playing
or in the stop mode.
Selected track number
1 2 3
4 5 6
7 8 9
+100
1 2 3
4 5 6
7 8 9
+100