Filter
Top Products
Installation will start automatically after downloading is complete.
You can confirm the progress status on the screen.
After the software update is complete, the HDD AUDIO PLAYER restarts automatically.
Note
Do not turn the HDD AUDIO PLAYER off or disconnect the LAN cable during the software
update. This may cause a malfunction.
Select [Cancel] to cancel the software update while downloading the software.
If the software update fails, an update error screen appears and the HDD AUDIO
PLAYER may restart.
If you update the software during playback, the playback stops.
The power is automatically turned off.
If the [Auto Standby] function is set to [On], the HDD AUDIO PLAYER is automatically
turned off after it is not operated for approximately 20 minutes.
If the sleep timer function is set, the HDD AUDIO PLAYER is automatically turned off
when the specific time you set has elapsed.
If the top of the HDD AUDIO PLAYER is covered, the internal protector activates and the
HDD AUDIO PLAYER automatically turns off. Remove the object(s) covering the upper
panel of the HDD AUDIO PLAYER and turn the power on again.
When the [Network Standby] function is set to [On], the HDD AUDIO PLAYER
automatically turns on when a music file transfer is performed by HAP Music Transfer or
the HDD Audio Remote application installed on your smartphone or tablet. The HDD
AUDIO PLAYER turns off automatically when the music files are transferred and
registered.
The power is automatically turned on.
If the [Network Standby] function is set to [On], the HDD AUDIO PLAYER is turned on
when it is operated through HDD Audio Remote or music files are transferred through
HAP Music Transfer.