Filter
Top Products
[33] Wi-Fi network connections (wireless LAN)
Method 4. Setting up a network connection using the
(WPS) PIN code configuration method
You can set up a connection by entering the (WPS) PIN (Personal Identification Number)
code of the HDD AUDIO PLAYER into the wireless LAN router/access point to authenticate
the connection between the devices.
1. Select [Settings] - [Network Settings] - [Internet Settings].
2. Select [Wireless Setup].
3. Select [Select access point].
The HDD AUDIO PLAYER starts searching for the available access point.
4. When the list of available network names (SSID) is displayed, select [Add a new
access point].
5. Select [(WPS) PIN Method].
The (WPS) PIN code for the HDD AUDIO PLAYER appears.
6. Enter the (WPS) PIN code of HDD AUDIO PLAYER into the wireless LAN
router/access point.
For details on entering the (WPS) PIN code, refer to the operating manual of your
wireless LAN router/access point.
7. When you have finished entering the (WPS) PIN code, select [Start] on the HDD
AUDIO PLAYER.
The HDD AUDIO PLAYER and wireless LAN router/access point start authenticating
the connection with each other.
When the certification is completed, a confirmation screen of the network name (SSID)
and security key (WEP/WPA) appears.
8. Select [Next] on the confirmation screen.
9. When the setup is completed, select [OK] on the screen.
Note
You cannot cancel the connection after the HDD AUDIO PLAYER has started connecting
to the network.