Filter
Top Products
You can set the Sleep timer. When the specific time you set has elapsed, the HDD AUDIO
PLAYER is automatically turned off.
1. Select [Settings] - [System Settings].
2. Select [Sleep].
3. Set the specific time until the Sleep timer function activates from [Off] (factory default
setting), [00:10], [00:20], [00:30], [00:40], [00:50], [01:00], [01:30] or [02:00].
Note
The Auto Standby function that automatically turns the HDD AUDIO PLAYER off does not
work after you set the Sleep timer.
If the HDD AUDIO PLAYER is set to Network Standby mode, you can operate it through
HDD Audio Remote even after the HDD AUDIO PLAYER has been turned off after the
specific time you set has elapsed.
The Sleep timer is canceled if one of the following operations is performed after setting
the Sleep timer:
A software update is started.
Formatting of the hard disk drive is started.
Rescanning of the hard disk drive is started.
The HDD AUDIO PLAYER is manually turned off.
The product is reset. (The factory reset function is performed.)
The Sleep timer is set to off.
Hint
When the remaining time until the sleep timer activates is less than 60 seconds, the
remaining time is shown on the screen.
You can set the Sleep timer from the Playback Options menu while playing a track.
Receiving notifications about software updates (Software
Update Notification)
If you set the Software Update Notification function to [On], a notification appears on the
Home screen when a new version of the software is available.
1. Select [Settings] - [System Settings] in the Home screen.