Filter
Top Products
The track is stored in an externally connected hard disk drive and this has been disconnected from
the HDD AUDIO PLAYER.
You have performed the Clear Database function.
You have performed the Factory Reset or Format HDD (for an external hard disk drive) function on
the HDD AUDIO PLAYER.
[48] Useful functions
Operating an external amplifier using the remote control
or the dedicated application
If you register the remote control of a connected amplifier to the HDD AUDIO PLAYER, you
can operate the connected amplifier using the remote control of the HDD AUDIO PLAYER or
the dedicated HDD Audio Remote application.
The HDD AUDIO PLAYER is set to operate Sony amplifiers by default. You can set the HDD
AUDIO PLAYER to operate amplifiers from other manufacturers by changing the settings.
Use the [Settings] - [Amp Control Settings] menu to configure the settings for the amplifier
you are using.
Operations you can perform
Turning the power on or off
The following operations turns the power of the amplifier on or off along with the power of
the HDD AUDIO PLAYER.
On the HDD AUDIO PLAYER: Press the button.
On the remote control: Press the button.
On HDD Audio Remote: Operate the Power Control screen.
Adjusting the volume
On the remote control: Press the VOLUME +/– buttons.
On HDD Audio Remote: Tap the / buttons on the volume adjustment area.
Muting the sound
On the remote control: Press the MUTING button.
On HDD Audio Remote: Tap the muting button ( , , etc.)
Hint
You can also configure settings so that they are not controlled by the remote control, such
as when you want to turn the power of the HDD AUDIO PLAYER off but do not want to
turn the amplifier off.
If you hold down the VOLUME + button for a long time, the HDD AUDIO PLAYER may
stop increasing the volume to prevent the volume level from suddenly becoming too high.