Filter
Top Products
Compatible with USB 2.0.
Be sure to connect or disconnect the external hard disk drive (USB storage) only when
the HDD AUDIO PLAYER is in the standby mode.
The HDD AUDIO PLAYER registers content stored in the external hard disk drive to the
database in the HDD AUDIO PLAYER. If there is insufficient database capacity, you
cannot transfer any more music file or scan the content of a newly connected external
hard disk drive. In this case, delete unnecessary music files and perform the Rescan HDD
function. If this does not solve the problem, perform the Factory Reset function or the
Clear Database function, connect an external hard disk drive, and then rescan the
external hard disk drive.
Only the external hard disk drive that is currently connected can be used at the same time
as the internal hard disk drive.
The HDD AUDIO PLAYER is compatible with the ext4 and FAT file systems. External
hard disk drives with other file systems need to be formatted by selecting the formatting
function from the menu of the HDD AUDIO PLAYER. Please note that the content of the
external hard disk drive is deleted when formatting.
You cannot use an external hard disk drive (USB storage) formatted by the HDD AUDIO
PLAYER with other devices such as a computer, because the external hard disk drive is
formatted only for the HDD AUDIO PLAYER. To use the external hard disk drive with
other devices format it using the device you want to use it with. Please note that any
music files on the external hard disk drive are deleted when the hard disk drive is deleted.
If an external hard disk drive is connected during playback, the playback stops.
USB hubs cannot be used.
Connect an external hard disk drive to the EXT port on the rear panel of the HDD AUDIO
PLAYER as shown below.
: EXT port of the HDD AUDIO PLAYER
: External hard disk drive (USB storage)
[22] Network connections (wired LAN)
Required network environment