Filter
Top Products
1. Select [Settings] - [Network Settings] - [Internet Settings].
2. Select [Wireless Setup].
3. Select [Select access point].
The HDD AUDIO PLAYER starts searching for available access points.
4. When the list of available network names (SSID) is displayed, select [Add a new
access point].
5. Select [Manual registration].
An input space for the network name (SSID) appears on the screen.
6. When the input space for the network name (SSID) is surrounded by a white box, press
ENTER.
An editing display and keyboard appear.
7. Enter the network name (SSID).
For details on how to use the keyboard, see “How to input characters.”
8. When the network name (SSID) is entered, select [Next].
9. Select the security mode of your wireless LAN router/access point from [None], [WEP],
[WPA/WPA2-PSK] or [WPA2-PSK] on the security mode selection screen.
10. If you want to set up a security key, enter the security key (WEP/WPA) and then select
[Next].
Perform the same operations as step 7 to enter the security key (WEP/WPA).
11. Select either [Auto] or [Custom] on the selection screen for the IP address setup
method.
12. Follow the instructions that appear in the display to set up the connection.
Note
You can enter a maximum of 32 alphanumeric characters and/or symbols for a network
name (SSID).
If the security mode of your wireless LAN router/access point is not included in the
options in step 9, change the security configuration of the router.
You can enter 5, 13 or 26 alphanumeric characters and/or symbols for a WEP key or 8 to
63 alphanumeric characters and/or symbols for a WPA key.
[30] Wi-Fi network connections (wireless LAN)