Filter
Top Products
WAV files generally do not contain ID3 tag information. When a music file does not
contain ID3 tag information, that file is registered in [Unknown Genre], [Unknown Artist],
[Unknown Album] and [Tracks] with its file name. However, if the music information can
be analyzed and obtained from the Gracenote database, that file is re-registered to
Genres, Artists, Albums and Tracks.
The correct music information may not be obtained for some files due to the type of music
file.
Some music file management software only manages the music information in the
database on your computer and does not embed any music information to the music files.
In other cases, some music file management software embeds part of the music
information to the music files.
The method of embedding music information differs depending on the music file format in
some music file management software.
Some music file management software uses a different method from the HDD AUDIO
PLAYER to construct an album from multiple tracks.
[40] Playing music
Standby modes
The HDD AUDIO PLAYER has two types of standby mode: normal standby mode and
Network Standby mode.
Standby mode
Press the button to switch to standby mode so that you can save power.
(The HDD AUDIO PLAYER enters this standby mode if the Network Standby mode is
disabled. The HDD AUDIO PLAYER cannot be operated through the network.)
Network Standby mode
In this mode, the network function is activated even when the HDD AUDIO PLAYER is in
standby mode.
This function is useful in the following cases:
When music files are transferred to the HDD AUDIO PLAYER using the HAP Music
Transfer application.
When you want to launch the HDD AUDIO PLAYER from the HDD Audio Remote
application.
Select [Settings] - [System Settings] - [Network Standby] from the menu to set the Network
Standby mode.
Note