Filter
Top Products
Press the BACK button to return to the previous screen, and try [Select access point]
again.
If the wireless LAN router/access point you want is still not detected, select [Add a new
access point.] from the network list to add a new wireless LAN router/access point.
The wireless LAN router/access point may be set to “stealth mode.” Confirm the setting of
the wireless LAN router/access point and if the “stealth mode” is set to on, release the
setting.
It takes a long time to transfer and register music files to
the HDD AUDIO PLAYER.
We recommend using a wired LAN when you transfer music files stored on your computer
to the HDD AUDIO PLAYER.
When the HDD AUDIO PLAYER is connected to a computer through a wired LAN, file
transfers will take the following time (as a rough guide):
10 FLAC (44.1 kHz/16 bits) files: approximately 5 minutes
3,000 FLAC (44.1 kHz/16 bits) files: approximately one day
Transfer of music files via the network may be severely affected by conditions such as the
router or other devices you are using, signal conditions in the area or the status of the
HDD AUDIO PLAYER.
Transfer and analysis of the music files are done in parallel by the HDD AUDIO PLAYER.
Therefore, it may take some time before music file registration is completed.
You want to turn off the Wi-Fi (wireless LAN) function
but do not know how.
Select [Wired Setup] in [Network Settings] – [Internet Settings]. Wired LAN is activated
and the Wi-Fi (wireless LAN) function turns off. To re-activate the Wi-Fi (wireless LAN)
function, select [Wireless Setup] in the [Internet Settings] menu.
The external hard disk drive is not recognized.