Filter
Top Products
Method 4. Setting up a network connection using the
(WPS) PIN code configuration method
You can set up a connection by entering the (WPS) PIN (Personal Identification Number)
code of the HDD AUDIO PLAYER into the wireless LAN router/access point to authenticate
the connection between the devices.
1. Select [Settings] - [Network Settings] - [Internet Settings].
2. Select [Wireless Setup].
3. Select [Select access point].
The HDD AUDIO PLAYER starts searching for the available access point.
4. When the list of available network names (SSID) is displayed, select [Add a new
access point].
5. Select [(WPS) PIN Method].
The (WPS) PIN code for the HDD AUDIO PLAYER appears.
6. Enter the (WPS) PIN code of HDD AUDIO PLAYER into the wireless LAN
router/access point.
For details on entering the (WPS) PIN code, refer to the operating manual of your
wireless LAN router/access point.
7. When you have finished entering the (WPS) PIN code, select [Start] on the HDD
AUDIO PLAYER.
The HDD AUDIO PLAYER and wireless LAN router/access point start authenticating
the connection with each other.
When the certification is completed, a confirmation screen of the network name (SSID)
and security key (WEP/WPA) appears.
8. Select [Next] on the confirmation screen.
9. When the setup is completed, select [OK] on the screen.
Note
You cannot cancel the connection after the HDD AUDIO PLAYER has started connecting
to the network.
Do not turn the power off while the HDD AUDIO PLAYER is connecting to the network.