Filter
Top Products
Set to manually turn the 3D display on or off. Press the HOME button, then select [Settings] →
[Display] → [3D Settings] → [Auto 3D] → [Off].
The message [3D signal is detected.] automatically appears when 3D signal is
detected.
Deactivate the [3D Signal Notification] setting. Press the HOME button, then select [Settings] →
[Display] → [3D Settings] → [3D Signal Notification] → [Off].
You cannot turn the Active 3D Glasses on.
Replace the battery. (Applies only to TDG-BT400A/BT500A.)
For details on how to replace the battery, press the
button to jump to the title list. Then, press the
button again to go to “Watching in 3D.”
(When using the Touchpad Remote Control, press the touchpad. Then, press the touchpad again to
go to “Watching in 3D” for details.)
The LED indicator on the Active 3D Glasses blinks.
Lights up for 3 seconds: Indicates when turning on the glasses.
Blinks every 2 seconds: Indicates the glasses are powered on.
Blinks 3 times: Indicates the glasses have been powered off.
Blinks green and yellow alternately: Indicates the glasses have started the registration process.
Blinks 3 times every 2 seconds: Indicates the battery capacity is almost running out. Replace the
battery.
List of
Contents
© 2014 Sony Corporation
Top of Page
219