Filter
Top Products
i-Manual Print Font Size
Basic Operations
Parts Description
Watching TV
Enjoying
Movies/Music/Photos
Using Internet Services
and Applications
Watching TV with Friends
Far and Near
Using Other Devices
Using BRAVIA Sync
Devices
Useful Functions
Connecting to the
Internet
Using Home Network
Configuring Various
Settings
Troubleshooting
How to Use Bookmarks
Top Page > Troubleshooting > Network Connectivity Test Results
Network Connectivity Test Results
The test results are “Failed”/“Failed”/“Failed”.
The test results are “OK”/“Failed”/“Failed”.
The test results are “OK”/“OK”/“Failed” or “OK”/“OK (IPv6 Only)”/“Failed”.
The test results are “OK”/“OK (IPv6 Only)”/“OK (IPv6 Only)” or “OK”/“OK”/“OK (IPv6 Only)”.
The test results are “Failed”/“Failed”/“Failed”.
When using the wired LAN function, make sure that the cable is firmly connected.
When using the wireless LAN function, unplug the TV from the AC power, wait for a while, then plug it
in again.
The test results are “OK”/“Failed”/“Failed”.
The router function of your router may be turned off. Turn it on and try again.
When using the wireless LAN function, check the items below:
- If [Wireless Device on TV] is set to [Off], set [Built-in Wi-Fi] to [On].
- An incorrect security (WPA or WEP) key may have been entered. Make sure that the correct
security key is entered.
- If you select a network (SSID) from the scan list, ensure that you select a correct network (SSID). If
you enter an SSID manually, make sure that you enter the correct SSID.
- To find the correct security key and SSID, consult with the person who set up your network or refer
to the router’s instruction manual or website, or consult the router’s manufacturer.
- If you configured the TV’s wireless LAN function to connect to a wireless router (or access point) at
5GHz, the connection with the wireless router is disconnected while [Wi-Fi Direct] is [On]. When you
turn off [Wi-Fi Direct], the connection will automatically recover.
The test results are “OK”/“OK”/“Failed” or “OK”/“OK (IPv6 Only)”/“Failed”.
Your router (broadband router) may be incorrectly set up to connect to your Internet service provider
(such as an incorrect PPPoE setting). To set up your router correctly, refer to the router’s instruction
manual or website, or consult the router’s manufacturer. If you are uncertain about the set-up
information of your provider (such as your account name and password), consult your provider.
The test results are “OK”/“OK (IPv6 Only)”/“OK (IPv6 Only)” or “OK”/“OK”/“OK
(IPv6 Only)”.
Your TV uses only IPv6 to establish an Internet connection, and may not be able to use certain
network functions. Your router (broadband router) or Internet service provider may support only IPv6.
Refer to the router’s instruction manual or website, or consult the router’s manufacturer to check
226