Filter
Top Products
Program Configuration
40 MN5002
g. Copper or Shortwave (fibre optic) GBIC included in Host attach kits
h. Cables for host attach kits are ordered separately
i. Every controller must have at least one 9170-001 Disk Array
j. Maximum of ten, 9170 Disk Arrays (up to 100 (36, 72 or 180 Gigabyte)
drive modules)
k. Battery Backup Unit (BBU) supplied
l. 19 inch rackmount cabinet installation available
m. Height = 4U
n. One Storage partition is supplied. Ordered separately, feature code
P1T4 is Storage Partition 1-4. If you increase the number of attaches
using network hardware (hubs, switches, etc..), P5T8, Storage Partition
5-8 would be the additional feature code ordered. A form is available
with more (up to 16 (PT16)).
Note: Storage Partitioning enables sharing of the disk capacity from a single
9176 controller among several hosts or host group. One storage
partition is required for every host or host group. The partition
represents a logical division of the disk that is only visible to the host or
host group to which it is assigned.
9176-002 Disk Controller
This is modular, scalable storage for increasing capacity growth requirements,
also known as enterprise storage.
Logical Rules Summary:
Dual controller subsystem
a. Two storage processor cards (controller cards with 512MB memory)
b. Four Host I/O interface cards (two per storage processor) (two GBIC
ports per interface card)
c. Four DB9 Drive I/O interface cards (two DB9 ports per interface card)
d. Different Host Interface Attachments are optional. Must order host
attach to receive GBICs that are needed in the controller.
e. Supports up to 8 host attach kits, (should be ordered in pairs)
f. Both Homogeneous and Heterogeneous attaches are available
g. Copper or Shortwave GBIC included in Host attach kits
h. Cables for host attach kits ordered separately
i. Every controller must have at least one 9170-001 Disk Array