Filter
Top Products
MN5002 43
Program Configuration
• Slide assy feature codes are for Servers or other appliances that need to be
pulled out.
• Rail assy feature codes are for appliances other than the 9176/9170.
• The CBNT M03 is connected to the AC power source by a NEMA L6 power
cords on all North American installations.
• The CBNT M03 when shipped with an International power cords and will
require the local StorageTek office to provide the power connection for all
International installations.
• The CBNT M03 has dual power distribution units which includes dual
power cords. The feature code for domestic or international must be
selected.
Placement
• A subsystem is any combination of one 9176 Disk Controller and (n) 9170
Disk Arrays within the same cabinet
• The subsystem (its devices) is always postitioned at the bottom of the
cabinet.
• If subsystems have the same number of drawers in the same cabinet, the
subsystem with the largest number of drives goes on the bottom of the
cabinet
Note: For additional information, refer to the CBNT M03 User’s Guide
(ONLINE)
The following features are for power connector options and supply rails or
slide assemblies to add additional components. All of the feature codes can be
used for various components including servers, monitors, etc.. The multiple
feature codes are used for components that do not have a M03R feature code
available.
Table 1. M03 Additional Features
FEATURE CODE DESCRIPTION
9954
INTERNATIONAL PWR CORD
9955
N.A. NEMA L6-30P PWR CORD
00DR
WITHOUT DOOR (Filler panels in empty slots
01DR WITH DOOR
M3S1
1 SLIDE ASSY
M3S2
2 SLIDE ASSY
M3R1 1 RAIL ASSY
M3R2
2 RAIL ASSY
M3R3
3 RAIL ASSY