A SERVICE OF

logo

Open as PDF
next previous
Page 16 - 60 Xerox Document Centre System Administration Guide
9. Select to enable Authentication Failure Generic Traps.
10. Click Apply New Settings to accept the changes, Restore Set-
tings to return the settings to their previous values, or Default
Settings to return the settings to their default values.
To Add IP Addresses to the Trap Destination
Addresses list:
1. Open your Web browser and enter the TCP/IP address of the
Document Centre in the Address or Location field.
2. Click the Properties tab or click Properties in the directory
tree.
3. Select Connectivity, then select Protocols in the directory
tree.
4. Select SNMP Configuration in the directory tree.
5. Click Add IP Address.
6. Enter the IP Address of the SNMP manager that will receive
traps.