Page 4 - 4 Xerox Document Centre System Administration Guide
Go to a workstation and...
1. Use the CentreWare Print and FAX Drivers CD-ROM to
install print drivers on a Windows-based workstation. Details
for this are found in the document supplied with your printer
entitled Network Services Guide.
2. Connect the print driver you loaded above to the queue you
created on the NetWare server.
3. Open an application and print a test job.
4. Check your test job for quality and use the problem solving
section of the Document Centre Reference Guide for
resolving print defects.
5. If your test job does not print, refer to the troubleshooting
section in this document to correct the problem.
6. Repeat this Go to a workstation and... procedure at each
workstation that will print to this printer.
