Xerox Document Centre System Administration Guide Page 20 - 7
20. Scan Setup
without CentreWare
20. Scan Setup without
CentreWare
Scan Templates
The scan template is essentially a job ticket for the scanned job. The
template is user-programmable, and contains parameters for the
scanned document. The user can programme parameters such as
one-sided or two-sided scanning, scanned image size, and the
location on the file server where the file will be stored.
The Default Template
A default scan template (default.xst) is created during the
installation of the scanning option and is stored on the Document
Centre. It is available for all scanning installations.
It is selected at the Document Centre Control Panel Touch Screen to
begin the scanning process.
NOTE
The Native scanning installations described in this guide provide
only the default.xst template for all scanning users.
In this environment, additional scan templates can easily be created
using only Xerox’s CentreWare Internet Services, or the Xerox
Network Scanners Utility. You MUST refer to the Internet
Services Guide to create templates with Internet Services, or the
Network Scanning Services Guide to use the CentreWare
Template Utility.
