15 Problem Solving
422
034-522 There is no telephone line available for manual fax transmission. Wait until the
job in progress is completed, and try again.
034-523 The destination machine is too busy to accept your fax. Wait a while, and then
try again.
034-527 A dial control error occurred. Switch off the machine, and then switch it on
again. Contact the Xerox Welcome Center if the problem persists.
034-528 Manual fax transmission is not available while the machine is in dialing mode.
Wait a while, and then try again.
034-529 The received document cannot be printed using the paper loaded on the
machine. Try one of the following.
• Check that the proper size paper is loaded on the machine.
• Check that the trays are correctly installed and detected on the machine.
034-530 Operation timed out. Perform the operation within the specified time frame.
034-550 An error occurred during writing to the FaxCard-ROM. Contact the Xerox
Welcome Center.
034-700 The G3 DP (Dial Pulse) connection timed out. Switch off the machine, and then
switch it on again. Contact the Xerox Welcome Center if the problem persists.
034-701 The software needs to be reset. Switch off the machine, and then switch it on
again. Contact the Xerox Welcome Center if the problem persists.
034-702 Communication failed due to an incorrect fax number. Check the number, and
try again. If a speed dial button was used, check the correct number is
registered with the button.
034-728 An invalid number was specified. Check the destination number, and try again.
Contact the Xerox Welcome Center if the problem persists.
034-730
034-731
Refer to 034-508.
034-734 An internal error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
034-796 The fax number is invalid. Check the number, and try again.
034-797 A communication parameter error occurred. Switch off the machine, and then
switch it on again. Contact the Xerox Welcome Center if the problem persists.
034-798 A parameter error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
034-799 A fax error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
035-550 An error occurred during data write processing. Contact the Xerox Welcome
Center.
035-700 A fax error occurred. Perform the same operation again. Contact the Xerox
Welcome Center if the problem persists.
035-701 Unable to communicate due to an incorrect phone number. Check the phone
number, and perform the same operation again.
If DP (Dial Pulse) is used for G3, check that "∗" and "#" are not included in the
phone number.
035-702
035-703
The other party cancelled the transmission. Ask the other party to check their
machine status, and resend the document if necessary.
Code Description and Remedy
