Filter
Top Products
User's Guide HDSP System Multiface II © RME
19
WDM
SyncAlign guarantees synchronous channels when using MME multitrack software. This option
should only be switched off in case the used software does not work correctly with SyncAlign
activated.
With Interleaved activated, WDM devices can be used as 8-channel devices (see chapter 12.4).
Buffer Size
The setting Buffer Size determines the latency between incoming and outgoing ASIO and GSIF
data, as well as affecting system stability (see chapter 13/14).
SyncCheck
SyncCheck indicates whether there is
a valid signal (Lock, No Lock) for
each input (Word Clock, ADAT,
SPDIF), or if there is a valid and syn-
chronous signal (Sync). The Auto-
Sync Reference display shows the
input and frequency of the current
sync source.
Options
TMS activates the transmission of
Channel Status data and Track
Marker information of the SPDIF in-
put.
Disconnect interrupts the communica-
tion between I/O-box and PCI or
CardBus card. In case the Multiface
has been configured using the Set-
tings dialog and TotalMix, Disconnect
allows to use it Stand-Alone (without
a connected computer), after a power
supply has been attached.
SPDIF In
Defines the input for the SPDIF sig-
nal. 'Coaxial' relates to the RCA
socket, 'Optical' to the optical TOSLINK input.
SPDIF Out
The SPDIF output signal is constantly available at the phono plug. After selecting 'Optical' it is
also routed to the optical TOSLINK output. For further details about the settings ‘Professional’,
‘Emphasis’ and ‘Non-Audio’, please refer to chapter 26.2.
SPDIF Freq.
Displays the sample rate of the signal at the SPDIF input.
Time Code
Time Code from the input ADAT Sync. Not available for the Multiface II.