Filter
Top Products
User's Guide HDSP System Multiface II © RME
31
17.2 Installation
Hammerfall DSP is found in the Device Manager (>Settings/ Control Panel/ System<), category
'Sound-, Video- and Gamecontroller'. A double click on ' Hammerfall DSP ' starts the properties
dialog. Choosing 'Resources' shows Interrupt and Memory Range.
The newest information on hardware problems can always be found on our website www.rme-
audio.com, section FAQ, Hardware Alert: about incompatible hardware.
The dialog 'New hardware component found’ does not appear:
• Check whether the CardBus card is completely inserted into the PCMCIA slot, or the PCI
interface is correctly inserted in the PCI slot.
The card and drivers have been installed correctly, but playback does not work:
• Check whether the Hammerfall DSP appears in the Device Manager. If the ' Hammerfall
DSP’ device has a yellow exclamation mark, then there is an address or interrupt conflict.
• Even if there is no yellow exclamation mark, it is worth checking the ‘Resources’ tab anyway.