Filter
Top Products
Connecting the signal cables
40
6. Connect the signal cables:
Figure 13: Signal cable connections
•For Single View mode, connect one end of a DVI cable to any
of the DVI inputs of the display (4) or (5). Connect the other
end of the DVI cable to the DVI connector of the graphic board.
•For DuoView mode, connect Head1 of the graphic board to
the “left” DVI connector (5) and connect Head2 to the “right”
DVI connector (4).
• Connect the display’s USB upstream connector (6) to a PC USB
downstream connector by means of a USB cable.
• Connect any USB device to one of the display’s USB
downstream connectors (7).
• Connect the DC power input (9) of the display to the supplied
external DC power supply. Connect the other end of the
external DC power supply (10) to a grounded power outlet by
means of the proper power cord delivered in the packaging.
4
5
6
7
8
R
L
9