Filter
Top Products
Driver and Software Installation
50
Driver and Software Installation
This chapter will guide you through the installation of the drivers,
software and documentation associated with your B
ARCO NIO FUSION
Display System or B
ARCO NIO FUSION Display(s).
If you install Barco displays without Barco display controllers, no
drivers will be installed. Only the online user manual will be installed
on your system.
Driver and software installation prerequisites
Note: To install or remove the drivers, software, or
documentation you must be logged on as a user with
administrator privileges.
Your operating system must be installed and running before you can
install the driver, software and documentation for the display
controller(s) for your B
ARCO NIO FUSION Display System.
Before you begin make sure that all of your B
ARCO NIO FUSION
Display(s) are connected to the appropriate display controller(s) in
your system.
Note: This installation procedure is based on operating
Windows in “Classic” view style. If “Home” or “Default” view
style is selected in Windows, sections of this procedure may be
different than what is listed.
Installing the BARCO MXRT drivers and software
Note: The installation dialog will display in English if your
operating system’s language is not supported.
This process applies to the following versions of Windows:
• Windows XP Professional,
• Windows XP Professional x64 Edition,