Filter
Top Products
Vesa-mount installation
44
Vesa-mount installation
Important:
• Use an arm that is approved by VESA (according to the VESA
100 mm standard).
• Use an arm that can support a weight of at least 20 kg (44.10
lbs).
To attach the panel unit to an arm stand:
1. Release the display panel from the display stand. Therefore, (1)
press the panel release button at the rear of the panel (not
visible on the drawing below). Next, (2) pull the panel forward
and (3) lift it from the stand.
2. Attach the panel firmly to the arm stand using 4 screws M4 x 10
mm.
3. You can mount the panel in landscape position or portrait
position. When mounted in landscape position, the BARCO logo