Filter
Top Products
Driver and Software Installation
55
To install the drivers and software silently, please follow the steps
below:
1. Insert the B
ARCO NIO FUSION Display System Installation CD-ROM
into your CD/DVD drive. When the Barco Product Installation
Wizard starts click “Cancel”.
2. Click the Start button in the task bar.
3. Click Run.
4. Click Browse and
a) Browse to the root directory of the B
ARCO NIO FUSION
Display System Installation CD-ROM.
b) Click on the file, Setup.exe, and click Open.
or
a) Browse to the root directory of the location where you
saved the contents of your B
ARCO NIO FUSION Display
System Installation CD-ROM.
b) Click on the file, Setup.exe, and click Open.
5. In the Open address window, place your cursor at the end of the
line of text that appears and add the following text after
Setup.exe, a space and -silent. Click OK.
Example (where D is the name of your CD/DVD drive):
D:\Setup.exe -silent
See figure 18 for an example of how the command line window
should look when using the silent install from the B
ARCO NIO
F
USION Display System Installation CD-ROM.