Filter
Top Products
Philips Semiconductors
User Manual of High-End RDS/EON
Car Radio System CCR612 (V0.3)
Application Note
96029
Key Description
PRE-UP
PRE-DOWN
MTL
DOLBY
These keys are installed only if the keys P1 - P6 are not installed.
When pressed short, these keys are used to step to the next/previous preset
programme. The AF follow mode on/off state will be set according to the state
stored in NVM.
When pressed longer than 2 seconds (until the radio bleeps), the current
station is stored in the last selected preset number. In FM, the state of the AF
follow mode is stored together with the frequency. Also the RDS PI code,
programme service name and AF list are stored.
When PRE-UP and PRE-DOWN are pressed together, the current programme
can be stored in a preset number to be selected:
1. A blinking preset number will be displayed.
2. Press PRE-UP or PRE-DOWN to step to the desired preset number.
3. Press either PRE-UP or PRE-DOWN longer than 2 seconds (until the
radio bleeps). The station is now stored. The preset number on the
display becomes steady again.
In cassette mode, these keys have additional functions:
- PRE-UP Switch MTL mode on/off
When on, the MTL icon is on.
- PRE-DOWN Switch DOLBY on/off.
When on, the DOLBY icon is on.
DISC UP
DISC DOWN
CD-changer mode:
In CD-changer mode, the keys PRE UP and PRE DOWN P6 have additional
functions:
- PRE UP Move to the next available disc
- PRE DOWN Move to an eventual previous disc
PTY This key is active only if the radio is in FM.
When pressed the current received PTY code is displayed. In case no PTY
code is received, "NO PTY" is displayed.
The user can now select a PTY code with FREQ-UP / FREQ-DOWN keys.
When no key was pressed for 6 seconds, the radio returns to normal mode.
The PTY scan is started by pressing the PTY key for 2 seconds (until the radio
bleeps). A search is started for the selected PTY code.
When a PTY code is received the PTY icon is on.
When a PTY search is busy, the PTY icon is blinking.
51